| |
|
| ESD Tester - EX11000-S |
 |
| PLATFORM |
• |
Test Capacity： |
| |
From 144 pins up to 2016 pins , in 48 pin increments Up to 1008 pins for HBM / MM dual pulser capacity . |
• |
Discharge Method： |
| |
Robotic motion and relay discharge combination . |
• |
Base Syster： |
| |
Standard system includes 144 pin capacity , HBM pulse networks , one bias supply , curve tracer , system controller , operating software , waveform verification software , operating manual , and QC test data . |
|
| LATCH-UP CAPABILITIES |
• |
Latch-up trigger pulse per
JEDEC78 |
|
- Risetime~30ns
- Duration from 1ns to 2sec
- Fall time~40ns |
• |
Power supply sequencing |
• |
User selectable time interval (0ns to 50sec) |
• |
Logic voltages 2V to 6V standard (1V to 5V optional) |
• |
Vector drivers up to 15mA |
• |
Frequencies up to 1Mhz , user defined |
• |
32K deep scan over user- defined pins. One pin driver for each device pin. |
• |
Logic comparators to collect pin response |
• |
Syncronous clock up to 1Mhz , user defined |
• |
Asynchronous clock up to 25Mhz |
|
| BIAS SUPPLIES |
| |
System includes one bias supply and the customer may specify up to six optional supplies from the following： |
| |
0-8V / 16V
0-20V / 7.5V
0-35V / 4.5V
0-60V / 2.5V
0-120V / 1.25V
0-200V / 0.75V |
| |
Maximum 3A per matrix channel
may be routed through the system.
A software safeguard controls this feature. |
|
| CURVE TRACE CAPABILITIES |
• |
0 to 20 volts at up to 1 amp resolved to 0.5mV |
• |
0 to 200 volts at up to 100mA resolved to 5mV |
• |
Measures currents as low as 1nA
User selectable failure modes include： |
| |
- Open / Short circuit
- Curve trace envelope method
- User defined percentage shift
at selected leakage
measurement points
- Stores and displays first , last ,
or all traces
- IDD measurement |
|
| ESD SPECIFICATIONS |
| HBM |
MM |
Latch-up |
| ESDA-S5.1 |
ESDA-S5.2 |
JESD 78 |
| JEDEC A114 |
JEDEC A115 |
|
| Mil-Std 883 |
|
|
| AEC Q100 |
|
|
| HIGH VOLTAGE SUPPLY |
• |
Voltage Range： |
| |
±50V to ±8,000V in 10V steps
±50V to ±12,000V optional |
|
| PHYSICAL SPECIFICATIONS |
• |
Power Requirement： |
| |
120 volt or 240 volt single phase 50 / 60hz 1800W . |
• |
Temperature Range： |
| |
Operating temperature +40F to 125F (+5℃ to +45℃)
Non-Operating temperature -40F to +140F (-40℃ to +60℃) |
• |
Humidity Range： |
| |
10-80% non-condensing |
| • |
Dimensions： |
| |
59"(L) x 36"(W) x 68"(H)
150cm(L) x 92cm(W) x 173cm(h) |
| • |
Weight： |
| |
800lbs (360kg) |
|
|
|
| 靜電模擬測試機(Oryx, ESD, CDM),充電放電模擬測試機,靜電電路傳輸線模擬測試機(TLP, VFTLP, VF-TLP) |
|
